110
PLAYBACK
PLAYBACK
You can use the camera’s built-in monitor screen to view
images after you record them.
Basic Playback Operation
Use the following procedure to scroll through files stored in
the camera’s memory.
1.
Press [ ] (PLAY) to
turn on the camera.
• This enters the PLAY
mode and causes an
image or a message to
appear on the monitor
screen.
2.
Use [] (forward) or [] (back) to scroll
through files on the monitor screen.
[ ]
NOTE
• Holding down [] or [] scrolls images at high
speed.
• In order to allow for faster playback image scrolling,
the image that initially appears on the monitor screen
is a preview image, which is of somewhat lower
quality than the actual display image. The actual
display image appears a short while after the preview
image. This does not apply to images copied from
another digital camera.
To Next Page
Loading...
