71
BASIC IMAGE RECORDING
Specifying Image Quality
Compressing an image before storage can cause a
deterioration of its quality. The more an image is
compressed, the greater the loss of quality. The image
quality setting specifies the compression ratio to be used
when an image is stored in memory. You can select an
image quality setting to suit your needs for higher quality or
smaller file size.
1.
In the REC mode, press [MENU].
2.
Use [] and [] to select the “REC” tab.
3.
Use [] and [] to select “Quality”, and then
press [].
4.
Use [] and [] to select the setting you
want, and then press [SET].
Fine
Normal
Economy
To get this:
Higher
Quality
Lower
Quality
Select this setting:
High image quality, large file
size
Normal image quality and
normal file size
Low image quality, small file
size
IMPORTANT!
• Actual file size depends on the type of image you
record. This means that the remaining image
capacity noted on the monitor screen may not be
exactly accurate (pages 29, 206).
To Next Page
Loading...
Need help?
General
