VIEWING IMAGES ON A COMPUTER
169
IMPORTANT!
• Low battery power can cause the camera to power
down suddenly during data communication. Use the
optional AC adaptor is recommended to power the
camera during data communication with a computer.
• If you want to transfer files from the camera’s built-in
memory to a computer, make sure there is no
memory card loaded in the camera before you
connect the USB cable.
1.
Connect the optional AC adaptor to the [DC IN
3V] connector of the camera, and then plug it
in to a household power outlet.
• If you are using batteries to power the camera, check
to make sure that the batteries are fully charged.
Plug
Terminal cover
[DC IN 3V]
AC power cord
AC adaptor
To Next Page
Loading...
Need help?
General
