Casio SE-S10

— 19 —
7-SEGMENT DISPLAY TEST[ 13 ]
[Function]
Tests if the front segment turns on correctly and if the back segment turns on and off correctly.
[Operation]
Command:
2 2 1 SUBTOTAL
n: Number of times to run
0 Once
1 ~ 9 Inniteloop
● Pressanykeytochangethedisplayonthebacksegment.
● Toendthistest,press[C(Clear)].
The test result is printed out.
[Front Segment Display]
[Back Segment Display]
[PRINT]
RAM 221
RAM WR OK
END 221