– 64 –
To correct errors in calculations
If you enter a wrong value, press C/AC once and then enter the correct value.
If you press the wrong arithmetic operator key ( !, @, #, $), simply press the correct
key before entering anything else.
About calculation errors...
Whenever an error occurs, the indicator “ERROR” appears on the display.
• When the number of digits in the mantissa of an intermediate or a final result
exceeds 12 digits.
• When the number of digits in the mantissa of a value stored in memory exceeds
12 digits. In this case, the Digital Diary automatically retains the last value stored
that did not exceed 12 digits.
• Division by zero.
To clear errors
Press C/AC once to continue with the same calculation. If you want to clear the
calculation and start again, press C/AC twice.
To enter the Calculation Mode
Press } to display the initial Calculation Mode screen.
Example 1: 21 + 3 = 24
Example 2: 11 + 10% = 12.1
To Next Page
Loading...
Need help?
General
