Casio WK-3000 User Manual

E-52
■ Resonance
Resonance enhances the harmonic components in the vicinity
of the cutoff frequency, which creates a distinctive sound. A
larger resonance value enhances the sound as shown in the
figure.
NOTE
• With some tones, a large resonance value can cause
distortion or noise during the attack part of the tone.
(3) Tone Pitch Parameters
■ Vibrato Type, Vibrato Delay, Vibrato Rate, Vibrato
Depth
These parameters adjust the vibrato effect, which causes
periodic changes in the tone.
■ Octave Shift
This parameter controls the octave of all tones.
(4) Tone Characteristic Setting Parameters
■ Level
This parameter controls the overall volume of the tone.
■ Touch Sense
This parameter controls changes in volume and timbre in
accordance with the relative amount of pressure applied to
the keyboard keys. You can specify more volume for stronger
pressure and less volume or a lighter pressure, or you can specify
the same volume regardless of how much pressure is applied to
the keys.
■ Reverb Send, Chorus Send, DSP Line , DSP Type, DSP
Parameter
These parameters control the effects applied to tones.
Level
Cut off frequency
Small Value
Resonance
Large Value
Frequency
Synthesizer Mode
735A-E-054A
WK3100_e_47-58.p65 04.3.26, 0:11 PM52

Casio WK-3000 Specifications

General

Brand	Casio
Model	WK-3000
Category	Electronic Keyboard
Language	English