E-64
Song Memory Function
Editing a Song
You can perform the following operations in the song editing
mode.
• Delete a song
• Delete a track
• Song header data rewrite (Panel Record)
To delete a song
1
Press the SONG MEMORY button once to enter
playback standby.
2
Use the [+] and [–] buttons to select the number of
the song you want to delete.
3
Press the [왔] CURSOR button. If there is no song
number on the display, press the [왔] CURSOR
button twice.
• This displays the song delete screen.
4
Press the YES button.
• This causes the message “Sure?” to appear, confirming
whether you really want to delete the song.
5
Press the YES button to delete the song and return
to playback standby.
To delete a specific track
1
Press the SONG MEMORY button once to enter
playback standby.
2
Use the [+] and [–] buttons to select the number of
the song that contains the track you want to delete.
3
Press the [왔] CURSOR button twice. If there is no
song number on the display, press the [왔] CURSOR
button three times.
• This displays the song delete screen.
Tr .Del .?
Number of the song that contains the track
(cannot be changed)
Track delete standby
NOTE
• In the case of real-time recording, you later can change
tone numbers you specified while recording to Tracks 1
through 6 is in progress.
• You can only change tone numbers that were originally
set for Tracks 2 through 6 using step recording.
To change a rhythm number
Use the number buttons or [+] and [–] buttons to change a
rhythm number.
NOTE
• In the case of real-time recording, you later can change
rhythm numbers you specified while recording to Track
1 is in progress.
• You can only change rhythm numbers that were originally
set for Track 1 using step recording.
To change a rhythm controller operation
*
* INTRO/ENDING 1 button, INTRO/ENDING 2 button,
VARIATION/FILL-IN 1 button, VARIATION/FILL-IN 2
button, SYNCHRO/FILL-IN NEXT button operations
Press the rhythm controller button you want to change to.
16 tBBld2
Int /End1
To Next Page
Loading...
