Casio XJ-A256 Function Guide

26
Starting and Stopping Projection from a Computer Connected
via Wireless LAN Connection
Starting 1-screen Projection
On the computer from which you want to start 1-screen projection, click the button on the
Wireless Connection 3 window. The button will change to and 1-screen projection will start from
the computer.
Performing this operation while projection is being performed from another computer will cancel the
current projection and switch to projection from the computer where the operation was performed. At
this time the wireless LAN connection is maintained between the projector and the computer whose
projection was cancelled.
Pausing 1-screen Projection
On the computer from which you want to pause 1-screen projection, click the button on the
Wireless Connection 3 window. This pauses the image that was being projected when you clicked the
button, and the button will change to .
To resume projection, click the button again.
Stopping 1-screen Projection
On the computer from which you want to stop 1-screen projection, click the button on the
Wireless Connection 3 window. This stops 1-screen projection from the computer and projects the
Wireless standby screen.
At this time the wireless LAN connection is maintained between the projector and the computer whose
projection was stopped, so the button can be clicked to restart 1-screen projection.
To establish wireless LAN connections between the projector and multiple
computers, and alternate between 1-screen projections
1. Establish a wireless LAN connection between the projector and the first
computer.
z This starts 1-screen projection from the first computer.
2. Establish wireless LAN connections between the same projector and the other
computers.
z Even as you connect to each computer, the 1-screen projection from the first computer is
maintained.
3. On the second or one of the other subsequent computers, click the button on
the Wireless Connection 3 window.
z This will interrupt 1-screen projection from the first computer and switch to 1-screen
projection from the computer whose button was clicked.
z Next you can click the button on the Wireless Connection 3 window of any of the other
connected computers to switch to 1-screen projection from that computer.

Casio XJ-A256 Specifications

General

Matrix size	0.65 \
Number of colors	16.78 million colors
Projection distance	- m
Projection technology	DLP
Contrast ratio (typical)	2000:1
Screen size compatibility	18 - 300 \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	±30 °
Aspect ratio	16:10
RS-232 ports	1
Offset	84 %
Throw ratio	1.15 - 2.3:1
Optical zoom	2 x
Zoom capability	Yes
Focal length range	- mm
Service life of light source	20000 h
Full HD	No
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format system	NTSC, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions	1280 x 800 (WXGA)
RMS rated power	1 W
USB connector type	USB Type-A
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	0
Wi-Fi standards	802.11b, 802.11g
Noise level	35 dB
Noise level (economic mode)	29 dB
On Screen Display (OSD) languages	CHI (SIMPL), CHI (TR), DEU, ENG, ESP, ITA, JPN, KOR, SWE
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	110 W
Power consumption (typical)	210 W
Power consumption (PowerSave)	0.4 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Cables included	AC, Composite, VGA

Weight and Dimensions

Depth	210 mm
Width	297 mm
Height	43 mm
Weight	2300 g