31
4.
Use the [
T
] and [
S
] keys to move the highlighting to the connection name you
want to select and then press the [ENTER] key.
z This will cause a “Do you want to change the wireless connection?” confirmation dialog box to
appear.
5.
Press the [
S
] key to move the highlighting to “Yes” and then press the [ENTER]
key.
z The wireless connection needs to be restarted in order to reflect the change, which will cause
the projected image to go blank. It may take a little time before the wireless screen is
projected again.
To initialize the Wireless setup
1.
While the Wireless screen is being projected, press the [MENU] key.
2.
Use the [
T
] key to move the highlighting to “Wireless” and then press the
[ENTER] key.
3.
Use the [
T
] key to move the highlighting to “Initialize Wireless Setup” and then
press the [ENTER] key.
z This will cause a “Initialize the Wireless setup?” confirmation dialog box to appear.
4.
Press the [
S
] key to move the highlighting to “Yes” and then press the [ENTER]
key.
z This returns all projector network settings (all settings on the System Admin page) to their
initial defaults. For details, see “System Admin Page Settings” (page 36).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
