To Next PageTo Next PageWhy does the remote controller not work with my Casio XJ-M145 Projector?
If the remote controller for your Casio Projector isn't working, first replace the batteries. If that doesn't solve the issue, ensure you are operating the remote controller within the allowable range of the projector.
How to fix blurry text on a Casio XJ-M145 Projector?
If the text is blurry on your Casio Projector, rotate the focus ring to focus the image. If that doesn't work, press the [AUTO] key to execute an automatic adjustment. If the issue persists, the frequency and phase may need adjusting in the “Image Adjustment 2 J Frequency” and “Image Adjustment 2 J Phase” settings on the setup menu. If the input source is a video camera or document camera, check to make sure there is no problem with the input source device.
Why is there no sound coming from my Casio XJ-M145 Projector?
If there is no sound from your Casio Projector, first check the volume level on the projector itself by pressing the remote controller [VOLUME] key and using [T] and [S] to adjust the volume level. Also, verify that the volume level of the device connected to the projector is not too low and that it is outputting audio. Ensure the audio output of the connected device is correctly connected to the projector’s AUDIO IN terminal or AUDIO IN L/R terminal. Finally, make sure the “Audio Out” setting is set to “Speaker” and not “Line” in the setup menu “Option Settings 2 J Audio Out”.
What to do if my Casio XJ-M145 shows no image or an abnormal image?
If no image is projected or the projected image is abnormal on your Casio Projector, first ensure that the connected computer or video device is turned on and outputting a video signal. Next, select the correct input source on the projector that corresponds to the connected device. If you're using the component output terminal of a video device, connect it to the VIDEO or S-VIDEO terminal of the projector instead of the COMPUTER IN terminal.
General| Resolution | XGA (1024 x 768) |
|---|---|
| Projection System | DLP |
| Lamp Type | Laser & LED Hybrid |
| Screen Size | 30 - 300 inches |
| Noise Level | 29 dB (Eco mode) |
| Brightness | 2500 ANSI Lumens |
| Max Resolution | 1600 x 1200 |
| Contrast Ratio | 2000:1 |
| Zoom | 1.2x |
| Inputs | HDMI, VGA, Composite Video |
| Outputs | Audio out |
