moving money forward
This mode is available by pressing either the MODE button or the mode name on the touch screen until
‘’ORIENT’’ is displayed on the home screen.
ORIENTATION mode allows the user to count and sort bills by one of the four possible orientations. The
orientation of the first bill in the hopper determines the sorting and counting orientation for the whole
stack. The machine will not count and will sort out any bills having a different orientation by directing them
into the reject pocket. Total number of bills and total value will be displayed on the home screen. When
the operation is complete, a detailed report can be viewed by pressing the REPORT button. Report of the
rejected bills can be viewed by pressing Rejected Bills on the touch screen.
To return to ORIENTATION mode from another mode, press the MODE button, or the mode name on the
touch screen, until “ORIENT” is displayed.
This mode is available by pressing either the MODE button or the mode name on the touch screen until
“VBATCH” is displayed on the home screen. VBatch mode (aka “Value Batch mode”) allows the user to
set a target value and count out a mixed denomination batch of the same currency. The machine will
process the loaded stack until the target value is reached in the stacker and will display “VBATCH
COMPLETE”. If the loaded stack runs out before the target is reached, the machine will stop and display
“VBATCH INCOMPLETE”.
To set the target VBatch value:
Make sure VBatch mode is selected.
Press the BATCH button or the smaller VBATCH label on the touch screen.
The “ VBatch value input” screen will be displayed.
Use the number pad on the touchscreen to enter the target value.
Press SAVE on the touchscreen.
Observe the target value next to the smaller VBATCH label on the home screen,
indicating that VBatch mode is activated and set to the desired batch value.
1.
2.
3.
4.
5.
3.5 Orientation Mode
3.6 VBatch Mode
14
To Next Page
Loading...
Need help?
General
