EasyManua.ls Logo

CAT MATE 335 - Important Safety Instructions; Assembly Instructions

CAT MATE 335
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances,
basic safety precautions should
always be followed to reduce the
risk of re, electric shock and/
or injury to persons, including the
following:
• Readandfollowallinstructionsthat
areontheproductorprovidedwith
theproduct.
• Registeryourpurchaseon-lineat
www.pet-mate.com(seeguarantee).
• Checkthatthevoltagelabelonthe
transformer(I)conformswithyour
supplyvoltage.
• Inspectproductregularlyforcorrect
operationanddamage.Donotuseif
indoubt.
• Thisproductisdesignedforuse
withpetsonly,asdescribedinthese
instructions.
• Closesupervisionisnecessarywhen
anapplianceisusednearchildren.
• Donotuseoutdoors.FOR INDOOR
USE ONLY.
• Donotletpumprundry.
• Turnopowerandunplug
transformer(I)withdryhandsbefore
disassemblingpetfountainor
cleaning.
• Turnopowerandunplug
transformer(I)ifpowercord/
plugsaredamagedorfountain
malfunctions.
• Donotuseinabathroom.
• Donotallowelectricalconnectoror
transformer(I)tobecomewet.
• Donotallowpetsorchildrento
tamperwithproduct.
• Donotuseanextensioncord.
• Ensuretransformer(I)isinawell
ventilatedpositionawayfrom
curtainsorotherammableitems.
• Transformer(I)isintendedtobe
correctlyorientatedinaverticalor
oormountposition.
• Applianceisplacedonaat,even
surface.
• Donotleaveapplianceunattended
forextendedperiods.
• Donotallowpetstochewor
swallowanyparts.
• Disposeofallpackagingmaterial
properly.
NOTE: Plastic bags could cause
suocation - keep away from children
and animals.
SAVE THESE INSTRUCTIONS
INSTRUCTIONS
4
2
3
5
1
A
D B
C
XY
D
D
A
E
F
G
D
D
G H
I J
A. ASSEMBLY
1. Removeupperbowlmoulding(A)asshowninFig.1andadjustowrate(Fig.2)as
required.
NOTE: An intermediate ow is recommended. Lower ows will give less water
loss through evaporation. Higher ows will cool the water more and may be more
appealing to your pet.
2. Removeltercartridge(B)frompackagingandrinseunderataptoremoveany
charcoaldust.Insertltercartridge(B)asshowninFig.1.
3. Replaceupperbowlmoulding(A)takingcaretoensureitisfullyseated.Filllower
bowl(C)withwaterupto‘MAX’mark(X,Fig.1).Connecttransformer(E)topump
(D)andplugintopowersupply.
4. Afterashortperiod,watershouldstartowing.Youmaytopupmainbowl(C)to
‘MAX’mark(X,Fig.1)usingajugasrequired.
WHEN IN USE, DO NOT LET THE WATER LEVEL FALL BELOW ‘MIN’ MARK
(Y, Fig. 1).

Related product manuals