To Next PageTo Next Page
Need help?Do you have a question about the Cateye CC-RS100W and is the answer not in the manual?
Initializes the computer by clearing all existing data and settings.
Selects the preferred unit for speed measurement between kilometers per hour (km/h) and miles per hour (mph).
Input the 4-digit tire circumference in millimeters (mm) for accurate speed calculations.
Provides a reference table and method to measure or look up the bicycle's tire circumference.
Sets the clock display format (12h/24h) and enters the current hour and minute.
Installs the computer bracket onto the bicycle handlebar, considering handlebar diameter.
Describes the procedure for attaching and detaching the computer unit from the mounted bracket.
Confirms the computer displays current speed and flashing speed units when the wheel rotates.
Ensures the clearance between the speed sensor and magnet is within the specified 5 mm limit.
General| Current Speed | Yes |
|---|---|
| Total Distance | Yes |
| Trip Distance | Yes |
| Elapsed Time | Yes |
| Average Speed | Yes |
| Maximum Speed | Yes |
| Wireless Transmission | Yes |
| Clock | Yes |
| Battery | CR2032 |
| Display | LCD |
| Water Resistance | Yes |
| Type | Wireless |
| Functions | Current / Average / Maximum Speed, Trip distance, Total distance, Elapsed time, Clock |
| Battery Life | Computer : approx 1 year (1hr use per day） Sensor : approx 1 year (1hr use per day） |
