Troubleshooting
Measurement does not work
The PADRONE DIGITAL does not switch to the measurement screen.
What should I do?
•
Is flashing on the PADRONE DIGITAL?
The PADRONE DIGITAL is connected to a smartphone.
Set [Connect] to [OFF] in the
(Menu) of the smartphone (Cateye Cycling™) or close
Cateye Cycling™.
Why is the sensor signal not being received?
•
If using a smartphone (Cateye Cycling™), is [Connect] set to [ON] in the (Menu)?
Set [Connect] to [OFF] or close Cateye Cycling™.
•
Are you using another smartphone application that is connecting to the
Bluetooth® sensor?
The Bluetooth® sensor may be connected to the smartphone.
Bluetooth® sensors are only able to connect with a single device at a time.
Stop using all other apps or change the app settings so that it does not connect to
Bluetooth® sensors.
•
Turn off Bluetooth® on your smartphone, as the sensor may be connected to the
smartphone.
Confirm that the sensor gets connected with the PADRONE DIGITAL.
It is recommended that Bluetooth® is turned off on your smartphone when the sensor
disconnects easily.
•
Are you also using other wireless devices simultaneously (including other Bluetooth®
products)?
Stop using the devices simultaneously and confirm that the connection is restored.
•
Press the RESET button on the sensor that cannot connect.
Confirm that the sensor gets connected with the PADRONE DIGITAL.
CATEYE PADRONE DIGITAL
1
To Next Page
Need help?
General
