Cateye Solar CC-2000 - User Manual

Mount the bracket on the left side of the handlebar using a rubber pad.

Mount the wheel sensor magnet onto the wheel spokes as directed.

Clamp the wheel sensor band to the right fork blade using a rubber pad.

Align marking lines and set a gap of approximately 1mm between sensor and magnet.

Mount the cadence sensor onto the left chain stay using a rubber pad.

Attach the cadence magnet to the inside of the left crank arm with a cable tie.

Align marking lines and set a gap of approximately 1mm between sensor and magnet.

Secure all cables neatly with cable ties, ensuring free movement.

Turn on the unit, enter serial number, clear data, and replace the battery cover.

Select and confirm the desired speed unit (km/h or mile/h).

Input specific values for wheel size settings, like 27" diameter.

Adjust the clock by setting the current hour and minute accurately.

Insert the main unit onto the mounting bracket and connect the cadence plug.

Verify sensor function by turning the wheel and crank, observing display indicators.