Step 5. Installing drivers for the Cavalry External Hard Drive.
Windows 2000/XP/Vista
Plug-and-play. No device drivers or configuration required. The
computer will detect the USB External Hard Drive as a new USB
device and display messages on the bottom-right corner reading
"USB Mass Storage Device Detected" and "Your new hardware is
installed and ready to use."
Windows 98SE/Me
1. Make sure Windows 98SE/Me is fully updated
2. Download drivers from www.cavalrystorage.com/su_download.htm
by clicking on "Windows 98 Driver". Extract the file.
3. Navigate the device manager.
1110
To Next Page
Loading...
