12 13
RAID
Your product is preconfigured in RAID 1 (mirrored). "Mirrored" means that
each of the two disks in your disk array contains the same data, providing
protection against the failure of one drive; however, when the drive appears
on your computer, it will be recognized as a single hard drive.
NOTE: Although the box indicates two hard drives are included, the total
capacity in RAID 1 mode will not equal the sum of the two because the
second drive is used as a "backup" of the first drive. (e.g. two 250GB drives
do not have a 500GB capacity. Instead, only 250GB is available for storage,
while the other 250GB is a backup of that data.)
The drive is preset in RAID 1 mode. If you would like to change RAID
settings, please refer to the next section.
To Next Page
Loading...
