CBE PC320-CA - Users Setting; Clock and Alarm Clock Configuration

s
s
s
s
s
s
To enter the set mode, press the “PROG ” button (ref. 3) for more than 2 seconds from the main clock
screen.
Select, by pushing the arrow keys ref. 1 and 2, the setting menu you want to operate and then confirm by
pushing the “PROG” button ref. 3;
- by selecting “CLOCK” you operate the menu to set only the parameters clock and alarm clock
- by selecting “SYSTEM” you operate the menu to set all parameters.
By using the arrow keys ref. 1 and 2 you can modify the setting of the parameters.
Confirm the setting by pushing the “PROG ” button (ref. 3), you then go automatically to next parameter.
Press the “PROG ” button (ref. 3) more than once to save the settings and exit the setting mode.
To exit without saving wait 20 seconds without pressing any key.
USER SSETTING’
CLOCK
Clocksetting
HOURS(blinking)
MINUTES(blinking)
-
-
clock
ALARMCLOCK
Activationofalarmclock
-ON(activation)
-OFF(deactivation)
Setalarmclocktime(onlyifalarmclockhasbeen
previouslyactivated)
-HOURS(blinking)
-MINUTES(blinking)
alm.clock
alm.clock
ON
“CLOCK”
GB
ENGLISH
GB
27