Need help?Do you have a question about the CBE PC380-KT and is the answer not in the manual?
Advice on battery maintenance, acid, discharge, terminals, and storage.
Installation, misuse, maintenance, and ventilation for the battery charger.
Recommendation to avoid leaving water in tanks to prevent fouling.
Maintenance, disconnection, correct tightening, and power off procedures.
Replacing fuses, finding the cause of damage, and checking amperage.
Explains the function of each button (1-8) on the control panel.
Explains the meaning of all displayed symbols and indicators on the control panel.
Details various functions including battery alarms, ammeter, clock, and temperature.
Instructions on how to set the clock and alarm clock parameters.
Instructions on how to activate and set the alarm clock time.
Adjusts the intensity of the button LED backlight for night situations.
Adjusts the display's backlight intensity when the control panel is in standby.
Allows selection of the display backlight colour.
Adjusts the display contrast level.
Details how to activate or deactivate acoustic alarms.
Instructions on how to set internal and external temperatures.
Instructions on how to calibrate the ammeter to zero.
Settings for the leisure battery (B2) and car battery (B1) voltmeters.
Activation/Deactivation of visualization bars for battery and tank status.
Lists and describes the function of each protection fuse in the distribution box.
Describes user connections (1-6) and their corresponding fuses.
Describes auxiliary connections (1-10) and their fuses.
Describes heater, pump, and lighting circuit connections (1-14).
Instructions for connecting waste water tank probes (screws or electronic).
Instructions for connecting the fresh water tank probe.
Instructions for connecting the control panel via its 16-pole connector.
Describes input signals for engine starting, battery charger, and negative signals.
Instructions for connecting mains earth and battery/chassis earth.
To connect to the positive pole of the leisure battery.
To connect to the positive pole (battery charger, solar regulator).
To connect to the positive pole of the chassis battery.
How the chassis battery is recharged via the battery charger.
How the leisure battery is recharged via engine alternator or 240V mains.
Explains D+ functions and their operation with/without SMART ALTERNATOR.
General| Output Voltage | 12V DC |
|---|---|
| Material | Plastic |
| Display | LCD |
| Battery Charger | Yes |
| Battery Type | Lead Acid |
| Protection | Reverse polarity |
| Mounting | Wall mount |
| Current Consumption | 50 mA |
| Certification | CE |
To Next Page
