CBE PC380-KT - Connections; User Connections Group 1; User Connections Group 2; User Connections Group 3

13
SIGNALS (OPTION A )“ ”
2) + input signal “S” net coming from the CBE battery charger.
1) + input signal contact key engine starting.
SIGNALS (OPTION “B”)
1) - input “D+” negative signal (-)
2 ) + input signal contact key engine starting.
1) + input signal “S” net coming from the CBE battery charger.
2 /)
1
2
1
2
26B)
27)
NOT CONNECTED
23)
USERS
1)
+ exit heater/HWS, it depends on the main button
ON/OFF.
3) /
7-8-9) + exit lights "B”circuit ; it depends on button.12V
2) + exit water pump; it depends on the pump button.
4 circuit ; -5-6) + exit lights "A" it depends on button.12V
FUSIBILE
12
13
11
7
14
21)
1
4
7
2
5 8
3 6
9
USERS
19)
1
4
2
5
3
6
3) + exit AUX (awning light), awning lightit depends on the
button.
2)
+ exit spare, it depends on the main button ON/OFF.
6)
+ exit RH, it depends on the main button ON/OFF.
1)
+ exit RH, it depends on the main button ON/OFF.
4-5)
+ exit TV sockets, it depends on the main button ON/OFF.
FUSE
3
1
5
2
4
24)
FRESH (POT) WATER TANK
To connect to the water tank probe.fresh
22)
USERS
5-6-8-9) exit gas users (fridge, k , ecc ...) (direct “B2”)itchen
2-3) + exit 3 way function fridge / AES
4) + exit electric step (direct “B2”)
1) + exit AUX (direct “B2”)
FUSE
8
6
9
10
20)
1
4
7
2
5 8
3 6
9
NOT CONNECT
18)
EN
CONNECTIONS
1 2
26A)
1
9
8
16
CONTROL PANEL
To connect to the 16 poles connector of the control panel.
25)
WASTE WATER TANK PROBE WITH SCREWS (RE-VI)
To connect to the waste water tank probe with screws or to the electronic
waste water tank probe.
NB: Do not connect both types of tank probes!
ELECTRONIC WASTE WATER TANK PROBE (RE-EL)