CBE PC380-KT - Users Setting; Clock Menu; Alarm Clock Setting

8
USER’S SETTING
- by selecting “ ” you operate the menu to set CLOCK
s
Select, by pushing the arrow keys ref. 7 and 8, the
setting menu you want to operate and then
confirm by pushing the PROG button 6 ; “ ” (ref. )
the parameters clock and alarm clock
- by selecting “DISPLAY” you operate the menu to
set the display parameters.
s
To enter the set mode, press the PROG” button
(ref. ) for more than 2 seconds
“
6 from the main
clock screen.
- by selecting “SETTING” you operate the menu to
set the system parameters .
s
To exit without saving wait 20 seconds without
pressing any key.
s
By using the arrow keys ref. 7 and 8 you can
modify the setting of the parameters.
s
To abandon programming and save changes,
select “EXIT” and then choose to save or not save
changes.
s
Confirm the setting by pushing “the PROG” button
(ref. )6 , you then go automatically to next
parameter.
CLOCK MENU
CLOCK
Clock setting:
- HOURS (blinking)
- MINUTES (blinking)
ALARM CLOCK
- ON (a )ctivation
- OFF (deactivation)
Activation of alarm clock:
- MINUTES (blinking)
Set alarm clock time (only if alarm clock has been
previously activated):
- HOURS (blinking)
clock
alm.clock
ON
alm.clock
EN