CBM CEL-200 - Page 2

2
How to use the CEL-200:
The interface is composed of an LCD display, three buttons below the display for menu
access, two buttons to the right of the display to adjust the different settings and two
buttons to the left of the display for selecting the operating mode and two multifunction
rotary encoders.
Depending on the operating mode, the main screen of the CEL-200 may look like this:
12:00:00
DAY: 1
Master Mode
Slave Mode
Time
Current Day
Lighting
Intensity
Main Menu
Menus
Menu Name
Option List
Schedule
System Config
Clock
Info
Back
0-10V Input Mode
Control
Voltage
>
>Zone 1<
100%
Zone 2
50%
Manual
Manual Mode
12:00:00
Input 0-10V
>Zone 1<
100%
10.0V
Zone 2
50%
Manual
Manual Mode
Selection
Cursor
Time
Selection
Cursor
Lighting
Intensity
Selection
Cursor