3
Press this button on the main screen to open the main menu. In a
menu, press to activate the selected menu item.
These arrows move the selection cursor.
On the clock adjustment screen, they adjust the current day.
On the main screen in manual mode, press to adjust the selected
zone’s light level.
In a menu, press to adjust the value of the selected parameter.
On the main screen, press to switch the selected zone into manual
mode. The screen shows a flashing “Manual” to indicate that the
manual mode is active for that zone.
On the main screen, press to switch the selected zone to automatic
timer mode. In master mode, the schedule is resumed. In slave
mode, the system uses the 0-10V input voltage to control lighting.
On the clock adjust screen, press to reset current day to 0.
On the main screen, press to toggle manual mode. Turn to adjust
lighting level. Left button for zone 1, right button for zone 2.
In a menu, turn to move the selection cursor. Press to activate the
selected menu item.
On the clock adjust screen, turn the left button to adjust hours and the
right button to adjust minutes.
On the schedule programming screen, turn to move and press to
activate the cursor. The cursor moves to the value that can be
adjusted, if so. Turn to adjust the value and press to move the cursor
back.
CEL-200 Buttons:
Menu
Left/ Right Arrows
Up / Down Arrows
Manual
Timer
Multifunction
Rotary Buttons
(Optional)
To Next Page
Loading...