29
Display and failure codes
Your machine is equipped with diagnostic systems which monitor
wash progress and will intervene to protect the washing machine in
the event of a fault.
In the event of any other fault with your washing machine, please
follow the steps below:
• Unplug the machine.
• Close the water tap.
• Contact CDA Customer Care.
Display Reason Solution
E10
Low water pressure, no
water in the washing
machine
Open the water valve, check the
water inlet hose and filter, check water
pressure
E21
Water not draining
properly
Check water drain pump and filter
E30
The door is not closed
Remove any obstructions that may be
stopping the door from fully closing
To Next Page
Loading...
