CDA WC600

17
Failure Codes and Troubleshooting
The programme indicators also serve as a diagnostic display to help in the event of a problem with the appliance.
Error Code Error description Advice
Alarm is active against water
overflow
• Turnothedishwasheranddisconnectthewatersupply
• ContactCDACustomerCare
The waste water cannot be
discharged
• Drainhoseisblocked
• Theltersofyourmachinemightbeblocked
• Restartthedishwasherandcanceltheprogramme
• Iftheerrorcontinues,contactCDACustomerCare
Continual fill error
• ContactCDACustomerCare
• Closethetap
Inadequate water supply
• Makesurethewatertapisfullyopen
• Closethewatertap,separatethewaterinlethosefrom
the tap and clean the filter.
• Restartthedishwasher.
• Iftheerrorcontinues,contactCDACustomerCare
Faulty heater sensor • ContactCDACustomerCare
Overheating error (temperature
in the machine is too high).
• ContactCDACustomerCare
Heater error • ContactCDACustomerCare
Spray diverter position error • ContactCDACustomerCare
Faulty electronic card. • ContactCDACustomerCare