CDVI CDV-DDP-F User Manual

EN EN
8
CDV-DDP-F, CDV-DDP-RH
2EASY 2-wire Video Door Station with Built-in Reader
7] SETTINGS
Debug Stage
[ 9 0 0 8 ]
Please Input Password
1 2 3
654
7 8 9
#0
*
RF CARD
>> Debug State <<
1-# Tools
0-# Redial
2-# Exits
When the door station
is in Standby, press ‘#’
key.
Enter ‘9008’, then
enter the Admin Code.
(66666666 by default)
Debug state menu is
launched.
Descriptions:
0-#: Call Monitor again
1-#: Go to Tools setting
2-#: Exit out Debug
State
The Debug State is the starting point for using all the functions on CDV-DDP.
Adjusting the Talk Volume
In Debug State, calling and conversations are adjustable. You can adjust the volume by
selecting the numbers 0 to 9.
Press [2#] to exit the Debug State.
Debug State
1. Installer Setup
2. Setup
3. Card Manage
4. Online Monitors
5. Online Devices
6. Voltage Measure
Pres NO.
to select
*Back
Tools
>> Debug State <<
0-# Redial
2-# Exits
1-# Tools
When working in Debug State press “1#” to enter tools page.
The Debug Tools are described in the table below:
Item Sub-menu
1. Installer Setup 1. ID Code [0]
2. Unlock Timing [01]
3. Unlock Output [0]
4. Monitor Timing [600]
5. Doorplate Mode [1]
6. Waiting Timing [040]
7. Talking Timing [090]
8. Installer Code ...
9. Default ...

CDVI CDV-DDP-F Specifications

General

Brand	CDVI
Model	CDV-DDP-F
Category	Intercom System
Language	English