CDVI Galeo - Audible Feedback; Programming Instruction

 

  TheSubMastercodeallowstheuser
  tochangeitsowncodewithoutentering
  inprogrammingmode.Forsecurity
  reasonsthecodeneedtobechanged
  periodically.Thisfeaturemakesiteasier
  andfastertochangeitscode.
  
  
  2beepsareemittedtoconrmentry
  inprogrammingmode.
   
  
  
  Onebeepisemitted.Enterthenew
  2-digitsubmastercode.Onebeep
  isemittedtoconrmprogramming
  ofthesubmastercode.
   
   
  2beepsareemittedtoconrm
  thatthekeypadisinstand-by
  operatingmode.

 
  Theaudiblesignalisenabled
  inprogrammingmode
  andwhentherelayisenergised
  afteravalidcode.
  Toenabletheaudiblefeedback
  onakeypress:
   
  
  2beepsareemittedtoconrmentry
  inprogrammingmode.
  
  Onebeepisemitted.Presstodisable
  theaudiblesignalduringakeypress.
  Presstoenabletheaudiblesignal
  duringakeypress.Onebeepconrms
  thenewsetting. 
  
  2beepsareemittedtoconrmexit
  fromprogrammingmode.
  
 
 
 
Programminginstructionsarethesame
  asfortheGALEOkeypadwith1
  relayoutput.
  :2relayoutputsN/O
  andN/Ccontacts8A@250V~.
  Fromuserlocation00
  touserlocation59toactivaterelay1.
  fromuserlocation60
  touserlocation99toactivaterelay2
  ReleaseTimeofrelay2enter
  submastercodeenter
  (defaultvalues1and3).
3relayoutputsN/O
  andN/Ccontacts8A@250V~.
 
fromuserlocation00
  touserlocation59toactivaterelay1.
  fromuserlocation60
  touserlocation79toactivaterelay2.
  fromuserlocation80
  touserlocation99toactivaterelay3.
  Releasetimeforrelay3enter
  submastercodeenter
  (defaultvalues4and6).
12
cdvi.se
cdvigroup.com

IlluminatedWeatherproofKeypadwithremoteelectronics
 