72
ENGLISH
The fan motor produces
unusual noises.
The motor fan is damaged. Replace the fan.
Cookware does not heat
up and does not appear
on the display.
The induction hob does not
detect the cookware because
it is not suitable for induction
cooking.
The induction hob does not
detect the cookware because it
is too small for the cooking zone
or is not centred in it.
Only use cookware designed
for induction hobs. Check
the ‘Selection of the suitable
cookware’ section.
Centre the cookware and make
sure its base matches the size
of the cooking zone.
When you try to heat
both cooking areas, the
display shows ‘u’.
The power board and the
board connected to the display
malfunction.
Check the connections.
The display board of the
communication unit is damaged.
Replace the display board.
The main board is damaged. Replace the power board.
Heating stops suddenly
during operation and the
display shows a ashing
“u”.
The cookware is not suitable.
Use a suitable cookware.
The cookware diameter is too
small.
The hob has overheated.
The unit has overheated. Wait
for the hob temperature to
return to normal.
Press the Power button to
restart the product.
The cookware detection circuit
is damaged.
Replace the power board.
To Next Page
Loading...
