cecotec Conga 1690 - High-Efficiency Filter Care; Side Brushes Maintenance; Free-Fall Sensors Cleaning; 8. BATTERY REPLACEMENT AND CHARGING

ENGLISH
34
3. Clean high-efciency lter with the cleaning brush.
4. Introduce the dust tank back into the robot and close the top cover.
HIGH-EFFICIENCY FILTER
Remove the high-efciency lter and shake it to remove all the dust.
Note:
• Replace the high-efciency lter every 3 months depending on the frequency and type
of use.
• Clean the lter periodically with a brush to avoid blockage.
SIDE BRUSHES
Remove and clean the side brushes regularly.
Note: In order to ensure a perfect cleaning, it is suggested to
replace the side brushes every 3 months.
FREE-FALL SENSORS
Clean the free-fall sensors with a soft cloth regularly.
Warning: Always transport the product turned off and
in its original package.
8. BATTERY REPLACEMENT AND CHARGING
• Do not use any other battery, power adapter or charging base than the one provided ofcially
by Cecotec.
• Do not use non-rechargeable batteries.