7
SAFETY INSTRUCTIONS
Read these instructions thoroughly before using the
appliance. Keep this instruction manual for future reference
or new users.
- This product must be used in accordance with the directions
in this instruction manual. Cecotec cannot be held liable or
responsible for any damages or injuries caused by improper
use.
- Make sure that the mains voltage matches the voltage
stated on the rating label of the appliance and that the wall
outlet is grounded.
- This product can only be disassembled by qualified
personnel.
- Do not touch wires, power supplies or power adapters with
wet hands.
- Keep the robot away from clothing, curtains and any other
similar materials.
- Do not expose the robot to direct sun, open fire or wet
environments.
- Do not sit or place heavy or sharp objects on top of the
appliance.
- This product is designed for indoor use only, do not use
outdoors.
- Before operating the robot, remove all objects and wires
that could affect its operating.
- Always place the device on a flat and stable surface. Avoid
placing it in unstable places where there is risk of falling,
such as tables or chairs.
- Turn off the power switch, located on the bottom part of the
robot, when it is not going to be used for a long time.
- Before operating it, make sure all the robot’s and charging
05660_Conga 1990 Connected_IM_YV_0121085.indd 705660_Conga 1990 Connected_IM_YV_0121085.indd 7 6/8/21 13:086/8/21 13:08
To Next Page
Loading...
