What to do if cecotec Conga 3290 Titanium does not work properly?
If your Cecotec Vacuum Cleaner isn't working correctly, try turning it off, switching it off completely, and then turning it back on.
General| Model | Conga 3290 Titanium |
|---|---|
| Category | Robot Vacuum Cleaner |
| Suction Power | 2300 Pa |
| Battery Type | Lithium-Ion |
| Battery Capacity | 2600 mAh |
| Run Time | 150 minutes |
| App Control | Yes |
| Mapping | Yes |
| Room Selection | Yes |
| Restricted Areas | Yes |
| Automatic Recharge and Resume | Yes |
| Auto Recharge | Yes |
| Scheduling | Yes |
| Noise Level | 64 dB |
| Wet Mopping | Yes |
| Operating Modes | Auto, Edge, Spot, Manual |
| Dust Container Capacity | 600 ml |
| Water Tank Capacity | 300 ml |
| Filter Type | HEPA |
| Connectivity | Wi-Fi |
| Voice Control | Yes |
| Virtual Walls | Yes |
| Climbing Ability | Up to 15 mm |
| Navigation Type | Gyroscope |
Identifies key physical parts and sensory components of the robot.
Details the wet and dry tank module and its features.
Describes the robot's charging station and its components.
Explains the mop attachment and its related parts.
Step-by-step guide for setting up the robot and its charging station.
Instructions for correctly installing the wet and dry tank.
Explains the function of physical buttons on the robot.
Details the automatic cleaning cycle with edge and zig-zag patterns.
How to command the robot to return to its charging base.
Describes the cleaning pattern along room perimeters.
Explains the robot's spiral cleaning motion.
How to control the robot's movement using directional arrows.
Covers performing two cleaning cycles for enhanced cleaning.
Details the scrubbing motion for intensive floor cleaning.
How to clean a specific small area.
Setting up zones the robot should avoid cleaning.
Selecting specific zones for the robot to clean.
Lists the benefits of using the companion mobile application.
Steps for downloading and setting up the robot's mobile app.
Control robot functions like pause, standby, and suction power via app.
Setting up automated cleaning schedules through the app.
Understanding the robot's status via LED light indicators.
Operating various cleaning modes remotely via the mobile app.
Instructions for cleaning and replacing the main brush.
Steps for cleaning the robot's wet and dry tank.
Guidance on cleaning and replacing the HEPA filter.
Procedures for cleaning and replacing the side brushes.
How to clean the sensors that prevent falls.
To Next Page