English - 15 -
Device Info: Connected USB storage devices will
Highlight the device of your choice and
OK
Set TimeShift: Tag the selected USB storage
Set PVR: Tag the selected USB storage device or
Format: Format the selected USB storage
device. Refer to USB Recording section for more
information
Speed Test:
Schedule List: Add reminders or record timers using
the Schedule List menu.
Time Shift Mode: Enable or disable timeshift recording
feature. Refer to USB Recording section for more
information.
Settings
You can access the Settings menu from the Home
Screen or from the TV options
Network & Internet
Connected/Not Connected icon on the Home screen
OK to access this menu.
Network Privacy Policy:
.
to scroll through and read the entire text. Highlight
AcceptOK to give your consent.
Wi-Fi:
Available networks
wireless networks will be listed. Highlight See all and
OKOK
Other options
Add new network: Add networks with hidden SSID’s.
Scanning always available: You can let the location
OK to turn it on
Wow:
Wol:
Ethernet
Connected/Not connected:
addresses.
Proxy settings:-
IP settings:
Channel
Channels
Channel
Installation Mode selection.
Input Source - Antenna
Channel Scan: Start a scan for digital terrestrial
channels. Back/Return button to
cancel the scan. The channels that have already been
found will be stored in the channel list.
Update Scan: Previously added
channels will be stored in the channel list.
Single RF Scan: Select the RF Channel by using
the Right/Left directional buttons. Signal Level and
Signal Quality of the selected channel will be shown.
Press OK to start scan on the selected RF channel.
The found channels will be stored in the channel list.
Manual Service Update:
manually.
LCN:
Channel Number system that organises available
broadcasts in accordance with a recognisable channel
Channel Scan Type:
Channel Store Type:
Favourite Network Select: Select your favourite
one network is available.
Channel Skip:
switching the channels via Programme +/- buttons
on the remote. Highlight the desired channel/s on the
OK to select/unselect.
Channel Swap:
selected channels in the channel list. Highlight the
OK to select.