CEI A100RC+ - Adjusting Luminous Intensity; Adjusting Animation Speed

User manual A100RC+ v1.0EN
5.6. Adjusting luminous intensity
It is easier to use the Bluetooth® application to adjust the intensity of the lights. It is still possible
to adjust it from the box A100RC+ . To do this it is necessary to
1. Cut the power to the A100RC+ ,
2.
Press the key and hold it,
3. Turn on the A100RC+ ,
4. Release the key,
5.
The current intensity setting will be displayed on the screen (L1 / L2 / L3 / L4),
6.
Use the keys and to set it again,
7.
Press the key to confirm.
The corresponding code sent to the lights in the form of micro-drops. The message rc is displayed
as the message is sent.
Adjusting the intensity setting automatically sets the lights to blue and the A100RC+ display to F0.
The setting is easier to judge in this mode.
5.7. Adjusting the animations speed.
It is easier to use the Bluetooth® application to adjust the sequencing speed of the lights. It is still
possible to adjust it from the box A100RC+ . To do this it is necessary to
1. Cut the power to the A100RC+ ,
2.
Press the key and hold it,
3. Turn on the A100RC+ ,
4. Release the key,
5.
The current speed setting will be displayed on the screen (d1 / d2 / d3),
6.
Use the keys and to set it again,
7.
Press the key to confirm.
The corresponding code sent to the lights in the form of micro-drops. The message rc is displayed
as the message is sent.
Adjusting the sequencing speed setting automatically sets the lights to psychedelic mode and the
A100RC+ display to A4. The setting is easier to judge in this mode.
www.c-
cei.fr
10