Celestron SS80 User Manual

6. Insert the chrome portion of the eyepiece into the 45° Erect Image
Diagonal.
7. Tighten the thumbscrew on the 45° Erect Image Diagonal to hold
the eyepiece in place.
Your SS80 is now set up and ready to use.
Using Your SS80 Visually
For your first look:
1. Point the SS80 at a distant object.
2. Sight along the tube to get in the general area of your target.
3. Look through the SS80 and center the target you selected.
The field of view is wide enough so that even casual pointing like this
should get the object into the field. If it is not, sweep a little in each
direction until the target is visible.
Focusing
To focus, turn either of the focusing knobs (found on both sides of the
SS80) until the image is sharp. To focus on a more distant object than
the one you are currently observing, turn either of the focusing knobs
away from the eyepiece. To focus on an object that is closer, turn
either focusing knob toward the eyepiece.
NOTE: The reference to direction is described as if you were
standing behind your SS80 spotting scope looking through
the eyepiece.
SS8QIC90 7

Celestron SS80 Specifications

General

Brand	Celestron
Model	SS80
Category	Telescope
Language	English