. 7 .
4.6) Load media sheets for printing
A sheet of media comprises a number of identical moulded or die-cut blanks. Available in a variety of sizes, materials and colours to
suit all applications, the range of media is shown in the
Cembre
“IDENTIFICATION AND LABELLING SYSTEMS” catalogue.
Proceed to positioning the media sheet on the specifi c
support template (See section 4.7).
4.7) Mount the support templates
Diff erent templates are supplied with MG3 to suit the range of printable
media sheets
.
Proceed as follows:
– Select the support template appropriate to the
media sheet
to be printed according to the table.
– Press the BLUE button (4) to open the carriage.
– Carefully position the template on the carriage, locating it correctly on the pins provided.
Positioning is identical for all versions of template (See FIG. A)
– Correctly locate on the template, a sheet of the medium to be printed (See sections 4.7.1 and 4.7.2).
PRINTABLE MEDIA:
MG2-PWC
MG2-PLT MG2-QTB MG2-PTD MG2-PTM MG2-WTB MG2-STB MG2-CTB MG2-MTB MG2-LTB MG2-ETB MG2-PSP
MG-TPMF
cable tags for holders (serie FLAT)
•
MG-TPM
cable tags for holders
•
MG-TDM
cable tags without holders
4x12mm 4x16mm
MG2-TDMO
cable tags without holders
•
MG-ETF
cable & conduit tags
•
MG-KMP
wraparound cable markers
•
MG-CPM
terminal block markers
• ••••••
MG-CPMF
terminal block marker strips
•
MG-VYB
terminal block marker labels
•
MG-SPM
component markers, push in
•• •
MG-TAP
legends precut
•
MG-PTS
push button legends
•
MG-TAPW
legends 9 mm precut
•
MG-TAR
legends precut
•
MG-DOG
dog tags precut
•
MG-TAA
self adhesive precut legends
•
MG-VYT
self adhesive precut labels
•
MG-VCT
self adhesive precut labels
•
MG-PYT
self adhesive precut labels
•
MG-SAT
security labels
•
MG-PLC
PLC legends
•
MG-17.5
modular legends
•
MG-VRT
panel plates
•
MG-SIGNS
panel legends
•
Supplied Support templates available separately
Template
MG2-PLT
Locating pins corresponding to
apertures in the underside
of templates
Carriage fully open
Support templates each have a protective PET blank on their upper side.
If this needs to be replaced due to contamination, damage or wear, use only genuine Cembre spare parts.
Do not use a template without its protective blank.
Template
MG2-PWC
FIG. A
4
Templates
MG2-QTB
MG2-LTB
MG2-WTB
MG2-STB
MG2-CTB
MG2-MTB
MG2-PTD
MG2-ETB
MG2-PSP
1
2
3
To Next Page
Loading...
