Page 10Item 96308
For technical questions, please call 1-888-866-5797.
INSPECTION, MAINTENANCE, AND CLEANING
1. WARNING! Make sure the Rotary Selector Switch of the tool is in its “OFF”
position before performing any inspection, maintenance, or cleaning procedures.
2. BEFORE EACH USE, inspect the general condition of the tool. Check for loose
screws, misalignment or binding of moving parts, cracked or broken parts, damaged
electrical wiring, and any other condition that may affect its safe operation. If
abnormal noise or vibration occurs, have the problem corrected before further use.
Do not use damaged equipment.
NOTE: Replacement parts are not available for this product.
MAINTENANCE CHART
Maintenance Type
Before
Use
After
Use
Weekly Monthly
Every 6
Months
Yearly
Inspect tool for damage
(see #2, above)
X
Wipe off with clean, moist
cloth
X X X X X
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
To Next Page
Loading...
