CEN-TECH 99722 - Page 17

Contrast Adjustment
1) From System Setup menu, use UP/DOWN scroll button to select
Contrast, and press ENTER button.
15
2) From Contrast menu, use UP/DOWN scroll button to increase or
decrease contrast.
3) Press ENTER button to save your settings and return to previous
menu.
Unit of Measurement
• Metric is the default measurement unit.
1) From System Setup menu, use UP/DOWN scroll button to select
Unit of Measure and press ENTER button.
Contrast
（30%）
System Setup
2/6
Language
► Contrast
Unit of Measure ?
Auto Power-off
Beep Set
Tool Self-test
Use or to change