CEN-TECH 99722 - Page 31

1) Use UP/DOWN scroll buttons to select Erase Codes from
Diagnostics Menu and press ENTER button.
Diagnostic Menu
2/6
► Read Codes
Erase Codes
View Freeze Frame ?
I/M Readiness
Vehicle Info.
Unit of Measure
2) A warning message comes up asking for your confirmation.
Erase Codes
Erase trouble codes!
Are you sure?
YES NO
z If you do not want to proceed with erasing codes, press ESC
button or use LEFT/RIGHT scroll button to select NO to exit.
A message of “Command Cancelled!” show ups. Wait a few
seconds or press any key to return to Diagnostic Menu.
3) Press ENTER button to confirm.
z If the codes are cleared successfully, an “Erase Done!”
confirmation message shows on the display.
29