CEN-TECH 99722 - Page 37

..........Diagnostic Menu..... ........
5/6
Read Codes
Erase Codes
View Freeze Frame ?
I/M Readiness
► Vehicle Info.
Unit of Measure
35
2) Observe on-screen instruction.
Vehicle Info.
Turn key on
with engine off !
Press any key to con.
3) Wait a few seconds while the scan tool reads vehicle information.
………………Vehicle Info.
Reading Info…
- Please Wait -
z If the vehicle does not support this mode, a message shows on
the display warning that the mode is not supported.
4) From Vehicle Info. menu, use UP/DOWN scroll button to select
an available items and press ENTER button.