DATA LOGGER SOUND LEVEL METER
▪ Install TestLink:
1.We recommend close all other application before installing TestLink.
2.Insert setup CD disk to CD disk drive.
3.Choose the Start button on the Taskbar and select Run.
4.Type E:\SETUP and choose OK, then it will copy SE322.exe ( executable
file ) and help file to your hard disk ( default is c:\program
files\TestLink\SE322 ).
For detailed other operation instruction, please refer to the online help while
executing SE322.
▪ Main Menu
File | Open- Retrieve files from the disk.
Save - Save the active window(when the caption bar is highlighted) data to
the disk.
Print - Print the data of the active window(graph or list).
Printer Setup - Select printer.
File | Exit:Terminates TestLink program.
View | Control Panel:By opening the Panel Window, the user can control
meter via the button in this window.
View | Real-Time Graph:Open Real-Time Graph display to graph the
present data.
Real Time Data | Run - Start collecting real time data .
Stop - Stop collecting real time data .
DataLogger: By opening the DataLogger Window, the user can load
recorded data of meter to PC in this window.
Output To Graph - Graphing tabular data.
2
www.SpectoTechnology.com
Specto Technology
y
1061 E. Elizabeth Ave. Linden, NJ 07036
y
866-925-7737
y
info@spectotechnology
10
To Next Page
Loading...
