Center 342 User Manual

INTV
SELECT
3 Sec
Erase
MEMORY
1 Sec
REC
HUMIDITY RECORDER
342
SE-342

Center 342 Specifications

General

Sensor	K-Type Thermocouple
Display Type	LCD
Type	Thermometer
Resolution	0.1°C
Battery	9V battery
Operating Temperature	0°C to +50°C

Summary

I. SAFETY INFORMATION

II. FEATURE

III. GENERAL SPECIFICATION

IV. NAME AND FUNCTION

LCD Display

Shows current readings and status indicators.

INTV Setup Button

Button used for setting recording intervals and other parameters.

Select Button

Button used for selecting options or values.

Back Light Button

Activates the LCD backlight.

Sensor Window

Area where the humidity and temperature sensor is located.

Infrared RS232 Interface

Interface for data communication.

V. OPERATION INSTRUCTIONS

5.1 Setup

Instructions for configuring the device settings.

5.2 Temperature Recording

Detailed steps for initiating and stopping data recording.

5.3 Erase Memory

Procedure for clearing stored data from the device's memory.

5.4 Download Data

Instructions for transferring recorded data to a PC.

5.5 Replace Battery

Guidelines for safely replacing the device's batteries.

VI. Software

6.1 Installation

Guide for installing the SE-342 software, including system and hardware requirements.

6.2 Introduction

Overview of the SE-342 software interface, main screen, and menu functions.