Humidity Recorder
10
VI. Software
6.1 Installation
• System Required:
Windows 95/98/ME/NT 4.0. /2000/XP
• Minimum Hardware Required:
PC system with Pentium 233MHz or higher.
64 MB RAM.
4X CD-ROM Drive or higher.
Recommended resolution 1024X768(or 800X600).
At least 15 MB byte of free hard disk space available to
install SE-342.
• Installation :
1. We recommend closing all other applications before
installing the TestLink SE-342 software.
2. Insert the setup CD disc to CD-ROM drive and the
installation program should start automatically.
3. If installation dose not start automatically, choose the
start button on the Taskbar and select Run.
4. Type E:\SETUP and choose OK, it will then copy
SE342.exe (executable file) and help file to your hard disk
(default is c:\program files\SE342).
To Next Page
Loading...
