Humidity Recorder
7
5.2 Temperature Recording
1. Press and hold for
1 second to start recording
and LCD will display
“REC”.
2. To stop recording, press
and hold for 1
second again. The “REC” symbol will disappear.
3. After step 1 and 2, a data set is stored in the
Recorder.
Note:
1. It is important to check
the memory status
before starting
recording.
2. LCD will show “FULL” when 32,000 records are stored
in Recorder or 15 data sets are stored in Recorder.
3. If recording is not active, recorder will power off
automatically after 60 seconds. It can be powered on
by pressing any button.
SELECT
SELECT
32,000 records available
totally and each segment
represents about 4,000
records available.
Erase
MEMORY
3 Sec
INTV
ECT
1 Sec
REC
To Next Page
Loading...
