DATALOGGER THERMOMETER
10
(5) When the connection is successful, click “Real Time | run” or
from main menu to
start recording real time data and there will be a waveform on the Real Time Graph
Window.
(6) Click “Real Time | Stop” or
to stop recording.
10.6 How to save the recorded real time data to a file?
(1) Click the graph window you want to save and the graph window will become active, then
choose File | Save from main menu or click from the tool bar .
(2) There will be a save dialog window for you to choose the file name and file type to
save.There are three types of file name you can choose, binary file(*.ghf), text file(*.txt)
and EXCEL format file(*.csv). The *.ghf file use much fewer disk space to save the data
than the other two file format, but it can only be used in TestLink SE374. Text file can be
opened by TestLink SE374 and any other word processor program like word, notepad etc.
EXCEL format file can be opened by TestLink SE374 and Microsoft EXCEL.
Note:
If decimal separator is comma in your country, this file format will be disabled,
because .CSV file also use comma to be data separator. For example 78,6 will become 78
and 6 in EXCEL )
To Next Page
Loading...
