Center 390 - SETUP Testlink SE-309

Sound Level Meter
12
12. SETUP TestLink SE-390 (Sound Level Meter)—
RS232 interface software:
y The SE-390 package contains:
1.80mm CD.
2.Custom designed USB cable for SE390.
y System Required:
Windows NT 4.0/ NT2000/ XP / VISTA.
y Minimum Hardware Required:
PC or NoteBook with Pentium 90MHz or higher, 32 MB RAM ;
At least 50 MB byte hard disk space available to install SE390.
Recommended resolution 800X600.
Install SE-390:
1.We recommend close all other application before installing SE390.
2.Insert setup CD disk to CD disk drive.
3.Choose the Start button on the Taskbar and select Run.
4.Type E:\SETUP and choose OK, then it will copy SE390.exe ( executable
file ) and help file to your hard disk ( default is c:\program files\SE390 ).
For detailed other operation instruction, please refer to the online help while
executing SE390.
 Main Menu
File | Open- Retrieve files from the disk.
S
ave - Save the active window (when the caption bar is highlighted) data to
the disk.
P
rint - Print the data of the active window(graph or list).
P
rinter Setup - Select printer.
File | Exit: Terminates SE390 program.
View | Control Panel: By opening the Panel Window, the user can control
meter via the button in this window.
View | Real-Time Graph: Open Real-Time Graph display to graph the
present data.
Real Time Data | R
un - Start collecting real time data.
S
top - Stop collecting real time data.
DataLogger: By opening the DataLogger Window, the user can load
recorded data of meter to PC in this window.
O
utput To Graph - Graphing tabular data.