DATALOGGER HYGRO THERMOMETER
12
8.2 Bluetooth Adapter Installation:
9. Maintenance
In order to ensure the accuracy of the thermometer for a longer
period of time you should calibrate it once a year.
Clean the device and the window of the display with a clean, lint-free,
antistatic and dry cleaning cloth.
Do no use cleaning agents that contain carbon or
benzenes, alcohol or anything similar to clean the product
since these substances damage the surface of the
measuring instrument. Moreover, these fumes are
hazardous to health and explosive. Do not use tools with
sharp edges, screwdrivers, metal brushes or anything
similar to clean the device.
10. CONNECTION BETWEEN PROBE & MAIN UINT
The probe can be connected or disconnected from the main unit by
fastening screw as shown in the graph. Rotate only the fastening
screw rather than the probe body to prevent from damaging the
probe.
(1) Power off
(2) Open the cover of the Bluetooth cabinet by a screwdriver.
(3) Install the Bluetooth adapter into its compartment, push up the adapter to the
connector.
Close the Bluetooth cabinet cover and fasten the screw.
To Next Page
Loading...