Center 522 - Testlink SE-522 Software

To Next Page

To Previous Page

DATALOGGER HYGRO THERMOMETER

11. Testlink SE-522 SOFTWARE

11.1 The SE-522 package contains:

 Software CD disk

 Micro USB cable

11.2 System Required:

Windows XP/ VISTA/ Windows 7/ Windows 8/ Windows 10

11.3 Minimum Hardware Required:

 PC or laptop with CD-ROM drive.

 At least 50 MB hard disk space available to install SE522

 Recommended screen resolution 1024X768 or above.

11.4 Tutorial - Quick Start to Use SE522:

Recording real time data in waveform:

(1) Power on the meter first and connect it to a PC USB port with the cable.(or set the

Bluetooth ON)

(2) Start SE522 program, or ( Click “search Bluetooth device” or

to establish

connection.)

Note: Before clicking “search Bluetooth device” or

, make sure Bluetooth pairing have

finished.

(3) If the connection is successful the panel will display the

same value (or Bluetooth symbol

) as the

Hygro Thermometer. If fail to connect the meter with

PC, it will display " No Connection " on the panel

window in SE522.

(4) Select sampling rate from Real-Time Graph

window.

(5) When the connection is successful, click “ Real Time | run ” or

from main menu to

start recording real time data and there will be a waveform on the Real Time Graph

Window.

(6) Click “ Real Time | Stop ” or

to stop recording.