DATALOGGER HYGRO THERMOMETER
16
DataLogger:
By opening the DataLogger Window, the user can load recorded data of meter to
PC in this window.
Output To Graph - Graphing tabular data.
Com port of Bluetooth device –
Choose com port to connect to Bluetooth device.
Search Bluetooth Device -
Automatically searching and connecting to Bluetooth device.
Disconnect Bluetooth Device – Disconnecting from Bluetooth device.
11.8 DataLogger:
When you have the
Hygro thermometer connceted to PC, select " DataLogger " from main
menu or click Datalogger icon from tool bar to load recorded data from the meter and there
will be a progress indicator to show the loading status. If error occurs, just click “ DataLogger
icon " again.
After the data was downloaded, the left hand side will show how many data sets were loaded
and detail information for each data set (start data, start time, recording rate and record
numbers).
To Next Page
Loading...