Page 2SKU 90589 For technical questions, please call 1-800-444-3353.
PRODUCT SPECIFICATIONS
Electrical Requirements 220 V / 60 Hz / 10 A
Motor 1 HP / 1740 RPM
Maximum Tire Diameter 39”
Maximum Tire Width 13”
External Locking Rim Dimensions 10”-18”
Internal Locking Rim Dimensions 12”-20”
Maximum PSI Working Pressure 110 PSI
Bead Break Force 5,500 lb.
Maximum Rotation Torque (Turntable) 795 ft-lb
Air Inlet Fitting Size 1/4”-18 NPT
Weight 566 lb
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside
of the front cover. Keep this manual and invoice in a safe and dry place for future
reference.
GENERAL SAFETY RULES
WARNING! Read all instructions
Failure to follow all instructions listed below may result in electric shock,
re, and/or serious injury. The term “power tool” in all of the warnings listed
below refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit.1. Cluttered benches and dark areas
invite accidents.
Do not operate power tools in explosive atmospheres, such as in the 2.
presence of ammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool. 3.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
To Next Page
Loading...
