EasyManua.ls Logo

Central Pneumatic 65902 - Specific Safety Instructions; Blasting Media and Material Warnings; Accessory and Operational Safety Rules

Central Pneumatic 65902
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SKU 65902/66742 For technical questions, please call 1-800-444-3353. Page 5
Symbol Denitions
Symbol Property or Statement
PSI
Pounds per square inch of pressure
ft-lb
Foot-pounds of torque
BPM
Blows per minute
CFM
Cubic Feet per Minute ow
SCFM
Cubic Feet per Minute ow at
standard conditions
NPT
National pipe thread, tapered
NPS
National pipe thread, straight
WARNING marking concerning Risk
of Eye Injury. Wear ANSI-approved
eye protection.
WARNING marking concerning Risk
of Hearing Loss. Wear hearing
protection.
WARNING marking concerning Risk
of Respiratory Injury. Wear NIOSH-
approved dust mask/respirator.
WARNING marking concerning Risk
of Explosion.
Specic Safety Instructions
Do not use sand (crystalline silica) as 1.
a blasting media. See information on
following page regarding the hazards
of silica inhalation.
WARNING: This product, when used 2.
for abrasive blasting and similar ap-
plications, produces chemicals known
to the State of California to cause
cancer and birth defects (or other re-
productive harm). (California Health
& Safety Code § 25249.5, et seq.)
WARNING: The brass components
of this product contain lead, a chemi-
cal known to the State of California
to cause birth defects (or other repro-
ductive harm). (California Health &
Safety code § 25249.5, et seq.)
Only use with accessories rated to 3.
handle the forces exerted by this
Soda Blaster during operation. Other
accessories not designed for the
forces generated may break and
forcefully launch pieces.
Attach all accessories properly to the 4.
Soda Blaster before connecting the
air supply. A loose accessory may
detach or break during operation.
Obey the manual for the air compres-5.
sor used to power this Soda Blaster.
Install an in-line shutoff valve to allow 6.
immediate control over the air supply
in an emergency, even if a hose is
ruptured.
Never point the Media Discharge 7.
Hose (19) and Ceramic Nozzle (21)
toward yourself or any person or
animal. Severe injury may result from
the abrasive spray.
Stand back from the item being blast-8.
ed. Deected spray from the abrasive
blaster may cause injury.
Prevent overow or deected abra-9.
sive spray from damaging nearby
items. Keep workplace cleared of
items which may be damaged by this
Soda Blaster.
All industrial applications of this Soda 10.
Blaster must meet OSHA require-
ments.
Whenever possible, test the abrasive 11.
blaster on a sample or inconspicu-
ous part of the work piece to prevent
damage during operation.
REV 09f

Related product manuals